Bridge Status Lights

Overview

The bridge status lights provide important information about the connection status and functionality of the Flair Bridge.

Light Indicators:

• Green Light: Indicates a stable and active connection to the network.
• Red Light: Indicates a problem with the Wi-Fi connection or that the bridge is not receiving power.
• Flashing Blue Light: Indicates the bridge is in setup mode.

Using POE with the Flair Bridge

Power over Ethernet (POE) can simplify the cable management for your Flair Bridge, allowing you to use a single cable for data and power.

Steps to Use POE:

1. Ensure your switch or injector supports POE.
2. Connect the Ethernet cable from the POE switch to the Flair Bridge.
3. Verify that the bridge powers on and that the status lights indicate a connection.

Switch a Bridge Internet connection between WiFi and Ethernet

You can switch between Wi-Fi and Ethernet connections for your Flair Bridge to optimize performance.

Switch Steps:

1. Open the Flair app on your device.
2. Go to the settings menu and select "Bridge Connection".
3. Choose either WiFi or Ethernet, depending on your preference.
4. Save the settings and check the bridge status lights to ensure connection.