Fit Issue – Flair
- 7 years ago
My existing vents are 6x10, but the faceplate doesn't cover the drywall like the original vent cover did. Does anyone else have this issue and is there a straightforward workaround (other than using masking tape or drywall work)?
Comments
- 6 years ago
I have the same issue. I may see if I can find a return style register vent that will fit. It will likely hide the lights, but they are really only used during setup.
It would be great if Flair would design an oversized grill!
- 4 years ago
Same issue! been looking for a condom or other piece that I can put between the vent and ceiling. It looks bad.
There was a comment in one of the documents that its up to you to repair the ceiling first.
The majority of ceiling vents (not flair) seem to have a wider edges than flair's do.
- 4 years ago
I also have this same issue. The size hole in the ceiling is correct for a 6 x 10 register, but the metal grill cover isn't large enough to cover the hole. They made it too thin. Anybody find a fix for this?
- 4 years ago
I have the same issue and I'm debating returning $700 worth of Flair products because the estimate to patch and paint my rooms is higher. I just need like a half inch on each side longer.
I've seen examples on Google where people 3D-print new covers...but I don't have a 3D printer and that seems like a huge pain.