8x12 vent support – Flair

Nick

I'm in texas, and with the new variable speed system they are installing, the supply vents are all being replaced with 8x12. Is I see an 8x10, but is the 8x12 coming?

Yes 0 No

Comments

James C.

Hi Nick,

We do not currently manufacture an 8x12 Flair Smart Vent. Please keep in mind that our Smart Vent sizes refer to the size of the duct opening and not the measurements of the vent cover itself.

We are looking into what sizes we will make next and we do track size requests; so, I have added your request for the size you mentioned. However, we cannot guarantee a timeline for when new shapes and sizes will be available. If we release 8x12 Smart Vents we will reach out to you and let you know.

Regards,

The Flair Team

David Folger

I'd be interested in this same size, in addition to a 14x14.

Mathew Baldwin

Nick

If you purchase the vent but the opening is larger, as long as the mounting holes line up my business (empyrean3d) will support you. We have designed a trim kit that works with all Flair Co Smart Vent models. We can also accommodate many different colors.

https://empyrean3d.com

Josh Danko

I'd also love to get 8x12. My whole house is 8x12 aside from the bathrooms.

Mathew Baldwin

Hi Josh Danko

Would you be interested in using our trim kit option to support you?

Josh Danko

What size vent would i need to purchase with your trim kit?

Mathew Baldwin

Generally speaking, we see clients with 8x12 vent openings purchase either a 6x12 Flair unit (screws in left and right sides) or an 8x10 Flair unit (screws in top and bottom), depending on where the holes are in the current vent cover.

Our trim kits are designed so that the Flair unit screws pass through the trim kit and into the wall with no additional hardware, so as long as you can install the Flair unit into the vent opening without any additional adapter, our trim kit will cover any air gap around the edges.

Once you have selected the size Flair you need, if our standard trim kit does not accommodate the existing vent opening, we can work with you to customize the outer dimensions to suit your requirement.

Josh Danko

The screws on my 8x12 vents currently are on the left and right i believe. They are on the short (8") sides. Would it be problematic if i am only replacing about 7 of my 12 8x12 vents. So 7 will be 6x12 and 5 will be the original 8x12

Josh Danko

Appreciate the info! I will look into this.

alonzo valentine

Add me to the list! I have 8x12’s all over my house

Alek

Also need 8x12 :-(

Mathew Baldwin

Hey all -

From Empyrean3D we will no longer be providing printed versions of Flair trim kits on Etsy. Please find our physical items at empyrean3d.com.