Mode – Flair

Flair Mode Selector

The Flair Mode selector is located in the Control Bar, at the top of the Flair app.

Flair's Mode settings are Heat, Cool, Auto Heat/Cool, and Off.

• Heat

  • When using an integrated smart thermostat, and Set Point Controller is Flair App, Flair will set the thermostat to Heat mode
  • Flair will set mini splits to Heat mode
  • Flair uses set points to operate Smart Vents for heating

• Cool

  • When using an integrated smart thermostat, and Set Point Controller is Flair App, Flair will set the thermostat to Cool mode
  • Flair changes mini splits to Cool mode
  • Flair uses set points to operate Smart Vents for cooling

• Auto Heat/Cool

  • When using an integrated smart thermostat, and Set Point Controller is Flair App, Flair will intelligently switch between heating and cooling and set the thermostat to either Heat or Cool mode (note: Flair will not set the thermostat to Auto Heat/Cool mode)
  • When not using an integrated smart thermostat, Flair reads duct temperature to know when the system is heating or cooling
  • For mini splits, Flair will intelligently switch between heating and cooling and set your mini split to either Heat or Cool mode
  • Flair uses set points to operate Smart Vents for heating or cooling, depending on the current mode

• Off

  • When using an integrated smart thermostat, and Set Point Controller is Flair App, Flair will leave Smart Vents in their last position and turn off the thermostat
  • Flair will turn off mini splits and follow Flair’s Smart Away bounds
  • If SPC = Thermostat, mini splits will follow your smart thermostat's Away bounds
  • Rooms will remain Active
  • Flair will leave Smart Vents in their last position