Puck Menus – Flair

Mode

The Mode menu allows you to update the Mode of a Flair home.  This is most useful in mini split setups.  Please use this with caution if Flair is working alongside your thermostat to control a central system.  The Mode can be changed via the Puck but may be overwritten by a smart thermostat.  The available modes are Heat, Cool, Auto Heat/Cool, and Off.

Settings

Sensor Puck

Note: The top line denotes the current configuration of the Puck: Sensor or Gateway

• Make Gateway: converts a Sensor Puck to a Gateway Puck.
• Unlink Gateway: resets a Sensor Puck by removing its connection from the Bridge or Gateway Puck it was linked to previously.
• Forget WiFi: deletes the WiFi credentials stored in the Puck.
• Scroll Speed: adjusts the scroll speed when navigating through Puck menus.  Many users find the Slow setting makes menu navigation easier.

Gateway Puck

Note: The top line denotes the current configuration of the Puck: Sensor or Gateway

• Make Sensor: converts a Gateway Puck to a Sensor Puck.
• Unlink Sensors: removes all links to any Sensor Pucks the Gateway was linked to.
• Forget WiFi: deletes the WiFi credentials stored in the Puck.
• Scroll Speed: adjusts the scroll speed when navigating through Puck menus.  Many users find the Slow setting makes menu navigation easier.

Status

• ID: the four-character ID used to identify the Puck.
• Version: displays the version information for this Puck.
• Network: this menu shows the following
  • For Gateway Pucks it shows the WiFi status
  • For Sensor Pucks it shows the ID of the Flair hub to which it is connected.
• MAC Address: displays the Puck's MAC address.

IR Setup

This menu is used when setting up a mini split that will be controlled by the Puck.